manualshive.com logo in svg

Emerson Rosemount 708, Reference Manual

Share
Download
Emerson Rosemount 708 Reference Manual Download Page 23

DD is required. To obtain the latest DD, visit the Emerson Easy Upgrade site at:

Emerson.com/Rosemount/Device-Install-Kits

.

Figure 4-2: AMS Device Manager

Note

SteamLogic

™

 software is provided for viewing steam trap status. Refer to the manual on

the CD for more information.

Troubleshooting

If the device is not joined to the network after power up, verify the correct configuration of
the network ID and join key, and that Active Advertising has been enabled on the Gateway.
The network ID and join key in the device must match the network ID and join key of the
Gateway.

The network ID and join key may be obtained from the Gateway on the System
Settings>Network> Network Settings page of the web server (see 

Figure 4-3

). The network

ID and join key may be changed in the wireless device by following the Fast Key sequence
shown below.

Function

Key sequence

Menu items

Join Device to Network

2, 1, 2

Network ID, Set Join Key

Reference Manual

Commissioning

00809-0100-4708

June 2022

Rosemount 708 Wireless Acoustic Transmitter Reference Manual

23

Summary of Contents for Rosemount 708

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands