Emerson Rosemount 648, Reference Manual

Page: 35 / 72

Figure 3-1: Antenna Position
3.3.3 Conduit entry
Upon installation, ensure each conduit entry is either sealed with a conduit plug using
approved thread sealant, or has an installed conduit fitting or cable gland with appropriate
threaded sealant.
Note
The conduit entries on the Emerson 781 Field Link are threaded ½ –14 NPT.
Figure 3-2: Conduit Entry
$
$
A. Conduit entry
3.3.4 Field Communicator connections
The Black Power Module needs to be installed in the device for the Field Communicator to
interface with the Rosemount 648 Wireless. For HART Wireless Transmitter
communication via a Field Communicator, a Rosemount 648 Wireless Device Dashboard
(DD) is required. Rosemount 648 Wireless Transmitters equipped with Rosemount X-well
Technology requires DD revision 648 Dev. 4 Rev. 1 or higher to view Rosemount X-well
functionality. To obtain the latest DD, visit the Field Communicator System Software and
Device Description site at:
Emerson.com/Field-Communicator
Refer to Figure 3-3 for instructions on connecting the Field Communicator to the
Rosemount 648 Wireless Transmitter.
Reference Manual Installation
00809-0200-4648 May 2020
Rosemount 648 Wireless 35