Emerson Rosemount 375, User Manual, Page: 80 / 140

Fieldbus Functionality 4-18
Display Network Settings
To view the network parameters for the device or
segment:
1. Display the Live Device List; see page 4-9.
2. Double-tap a device.
3. Double-tap
Advanced .
4. Double-tap Network Management .
5. Double-tap the desired label to view the values.
Tap the SAVE button to save this as a text file. Transfer
this file to a PC using the Easy Upgrade Programming
Utility. The file appears in the User Data tab.
Change the I/O Block Schedule
NOTE
You cannot schedule I/O blocks when, at a minimum,
any of the following hosts/linking devices are detected
on the segment: Rosemount 3420, DeltaV, Ovation,
Allen-Bradley, Honeywell Experion PKS, or Yokogawa
Stardom. To schedule I/O blocks, use the host system or
remove the device from the segment and connect it
directly to the 375 Field Communicator.
To change the schedule:
1. Display the Live Device List; see page 4-9.
2. Double-tap a device.
3. Double-tap
Advanced .
4. Double-tap Schedule . The I/O Block Schedule
window appears. Changing the I/O Block Schedule
would typically be done on the bench (not connected
to a control system) when you want to execute an I/O
block to verify that the outputs of the block are being
computed correctly.
5. Using the drop-down menu, select the appropriate
MacroCycle.
6. Tap the checkbox next to the I/O blocks that are to be
scheduled.
7. Tap OK . This will schedule the blocks and set the
mode on these blocks to Auto.
8. After reading the note, tap OK to acknowledge that
the I/O blocks were successfully scheduled.