manualshive.com logo in svg

Emerson Rosemount 375, User Manual, Page: 60 / 140

Share
Download
Emerson Rosemount 375 User Manual Download Page 60

HART Functionality

3-20

Storage 
Cleanup

The Storage Cleanup menu lets you delete the following 
items:

•

Internal Flash - 

By selecting 

YES

, you will remove all 

configurations saved in the Internal Flash.

•

Configuration Expansion Module

 - By selecting 

YES

, you will remove all configurations saved in the 

Configuration Expansion Module. 

•

Hotkey Menu

 - By selecting 

YES

, you will delete all 

items from the Hotkey menu. 

Viewing 
Available 
Device 
Descriptions

The Available Device Descriptions menu lets you view 
all the device descriptions in the 375 Field 
Communicator. HART device descriptions enable the 
375 Field Communicator to recognize and configure 
specific HART devices. 

To view the currently installed HART device descriptions:
1. On the HART Application main menu, double-tap 

Utility

.

2. Double-tap 

Available Device Descriptions

. The 

manufacturer names of the installed device 
descriptions are listed.

3. Double-tap the desired device manufacturer to 

expand the list. The models available for the 
manufacturer are listed.

4. Double-tap the desired device model. The device 

revisions available for the selected model are listed. 
One of the following icons appears next to each 
device description to indicate its status:

 - A tested device description can be used with the 

system software version in the 375 Field Communicator.

 - An untested device description has not been 

formally tested for use with the system software version 
in the 375 Field Communicator. The device description 
can be used, but you may experience unexpected 
results.

 - An incompatible device description cannot be used 

with the system software version in the 375 Field 
Communicator.

Summary of Contents for Rosemount 375













































































































































Reviews:

No comments