Emerson Rosemount 3051P, Reference Manual, Page: 35 / 110

25
Reference Manual
00809-0700-4001, Rev AA
Configuration
May 2017
Configuration
2.13.1 Changing a transmitter address
To activate multidrop communication, the transmitter poll address must be assigned a number from 1
to 15 for HART Revision 5, and 1–63 for HART Revision 7. Each transmitter in a multidropped loop must
have a unique poll address.
Changing transmitter address using a Field Communicator
Changing transmitter address using AMS Device Manager
1. Right click the device and select Configure
.
2. In HART Revision 5 mode:
a. Select Manual Setup , select the HART tab.
b. In the Communication Settings box enter polling address in the Polling Address box, select
Send .
3. In HART Revision 7 mode:
a. Select Manual Setup , select the HART tab and select the Change Polling Address button.
4. Carefully read the warning and click Yes if it is safe to apply the changes.
2.13.2 Communicating with a multidropped transmitter
To communicate with a multidrop transmitter, the Field Communicator or AMS Device Manager has to
be set up for Polling.
Communicating with a multidropped transmitter using a Field
Communicator
1. Select Utility and Configure HART Application .
2. Select Polling Addresses.
3. Enter 0–63.
Communicating with a multidropped transmitter using AMS Device
Manager
1. Select the HART modem icon and select Scan All Devices .
From the HOME screen, enter the Fast Key sequence
HART Revision 5 HART Revision 7
Device Dashboard Fast Keys
2, 2, 5, 2, 1 2, 2, 5, 2, 2