Programming the UC12PG-R Controller on the PMAC II Solo Panel
Overview • 7
15. Press the
button to scroll down to
5. SET
MAX PULSE %
and press the
button to
select. Use the
and
buttons to set the
maximum pulse rate generated at the maxi-
mum dewpoint setpoint. Press the
button
to save changes and go back to the Configu-
ration screen.
1.5.4.4. Setting Load Shed
16. From the Configuration screen, press the
button to scroll down the list to
6. SET
LOAD SHED
and press the
button to se-
lect. Use the
and
buttons to set the
load shed pulse rate generated when the load
shed input is closed. Press the
button to
save changes and go back to the Configura-
tion screen.
1.5.4.5. Setting Temperature and RH % Offsets
17. To adjust the setpoints for temperature and
RH % offsets, press the
button to scroll
down the list to
7. SET TEMP OFFSET
and
press the
button to select. Use the
and
buttons to add or subtract an offset
from the humidity sensor reading. Press the
button to save and go back to the Config-
uration screen.
18. From the Configuration screen, press the
button to scroll down the list to
8. SET RH%
OFFSET
and press the
button to select.
Use the
and
buttons to add or sub-
tract an offset from the humidity sensor read-
ing. Press the
button to save and go back
to the Configuration screen.
1.5.4.6. Setting the Sensor Fail Output
Setting the Sensor Fail Output is the last step for enter-
ing/changing setpoints.
19. From the Configuration screen, press the
button to scroll down the list to
9. SENSOR
FAIL OUTPUT
and press the
button to
select. Use the
and
buttons to adjust
percentage. This setting determines the
PMAC II Solo output in the event that the RH
or temp sensors are not present or have failed.
Press the
button to save and go back to
the first Setpoints Configuration screen (
).
Figure 1-20 - Maximum Pulse Setpoint Screen
Figure 1-21 - Load Shed Percentage Screen
MAX PULSE SETPOINT
100%
LOAD SHED PERCENTAGE
10%
Figure 1-22 - Space Temp Offset Screen
Figure 1-23 - RH Sensor Offset Screen
Figure 1-24 - Sensor Failure Percentage Screen
SPACE TEMP OFFSET
10F
RH SENSOR OFFSET
12% RH
%ON = SENSOR FAILURE
96%
Summary of Contents for PMAC II Solo
