Emerson PMAC II Solo, Installation And Operation Manual

Page: 12 / 22

Programming the UC12PG-R Controller on the PMAC II Solo Panel Overview • 6
4. Press the or buttons to move the cur-
sor to the "years" field of the current date.
Use the and buttons to set the current
year (e.g., 03, 04, 05, etc.).
5. Use the or buttons to move the cursor
to the "hours" field of the current time. Use
the and buttons to set the hour (0 -
23).
6. Press the or buttons to move the cur-
sor to the "minutes" field of the current time.
Use the and buttons to set the min-
utes (00 - 59).
7. Press the or buttons to move the cur-
sor to the "seconds" field. Use the and
buttons to set the seconds (00 - 59).
8. Press the button to save changes and
go back to the Configuration screen to contin-
ue adjusting setpoints.
1.5.4.2. Setting Dewpoints
To configure dewpoint levels from the Setpoints Con-
figuration screen (
Figure 1-13
):
9. Use the or buttons to move the cursor
to 2. SET MIN DEWPOINT and press the
button to select.
10. Use the or buttons to adjust the set-
point to the desired minimum dewpoint level.
11. Press the button to save changes and go
back to the Configuration screen.
12. Use the or buttons to select 3. SET
MAX DEWPOINT , and use the and
buttons to adjust the setpoint to the desired
maximum dewpoint level.
13. Press the button to save changes and go
back to the Setpoints Configuration screen
(
Figure 1-13
).
1.5.4.3. Setting Pulse Percentages
To configure pulse rate percentages from the Setpoints
Configuration screen:
14. Use the button to scroll down the list to
4. SET MIN PULSE % and press the
button to select. Use the and buttons
to set the minimum pulse rate generated at the
minimum dewpoint setpoint. Press the
button to save changes and go back to the
Configuration screen.
Figure 1-16 - Minimum Dewpoint Screen
MIN DEW POINT SETPT
16F
Figure 1-17 - Maximum Dewpoint Screen
Figure 1-18 - Configuration Screen
Figure 1-19 - Minimum Pulse Setpoint Screen
MAX DEW POINT SETPT
80F
2. SET MIN DEWPOINT
3. SET MAX DEWPOINT
4. SET MIN PULSE %
5. SET MAX PULSE %
MIN PULSE SETPOINT
10%