Emerson PMAC II Solo, Installation And Operation Manual

Page: 11 / 22

Programming the UC12PG-R Controller on the PMAC II Solo Panel Overview • 5
1. Press the button once to view the Enter
Password screen (
Figure 1-11
).
2. Press the button six times to enter the
password, and the button once to enter
and save. The cursor should appear over each
digit of the six-digit password field as they
are entered.
1.5.4. Entering/Changing Setpoints
To enter setpoints into the PMAC II’s UC12PG-R con-
troller:
1. Log on to the UC12PG-R as instructed in
Section 1.5.3.
2. The Main Configuration screen should be
visible (
Figure 1-12
). Use the button to
move the cursor to 2. SETPOINTS .
3. Press the button to select and open the
Setpoints Configuration screen (
Figure 1-
13
).
1.5.4.1. Setting Time/Date
To define the time and date from the Setpoints Config-
uration screen (
Figure 1-13
):
1. Use the and buttons to move the cur-
sor to 1. SET TIME AND DATE and press
the button to select.
Use the or buttons to access all the date and
time values in the Date and Time Configuration screen
(
Figure 1-15
).
2. Press the or buttons to move the cur-
sor to the "month" field of the current date.
Use the and buttons to set the month
(01 - 12).
3. Press the or buttons to move the cur-
sor to the "days" field of the current date. Use
the and buttons to set the day (01 -
31).
Figure 1-11 - Enter Password Screen
Figure 1-12 - Main Configuration Screen
Figure 1-13 - Setpoints Configuration Screen (First Screen)
Enter Password
< _
1.STATUS
2.SETPOINTS
3.ALARMS
4.% ON TIME
1.SET TIME & DATE
2.SET MIN DEWPOINT
3.SET MAX DEWPOINT
4.SET MIN PULSE %
Figure 1-14 - Complete Setpoints Configuration Menu
NOTE: Only four lines at a time are visible
through the PMAC II Solo keypad window.
Figure 1-15 - Date and Time Configuration Screen
1.SET TIME & DATE
2.SET MIN DEWPOINT
3.SET MAX DEWPOINT
4.SET MIN PULSE %
5.SET MAX PULSE %
6.SET LOAD SHED %
7.SET TEMP OFFSET
8.SET RH% OFFSET
9.SENSOR FAIL OUTPUT
00 / 00 / 00
00 : 00 : 00