1592022020 iCHILL 100D EVO QRG EN rel. 2.0 23.02.2022
10/40
5
DISPLAY LAYOUT
Pressing Up or Down button the display shows the temperature or pressure of the main probes configured in
the instrument.
The lower display shows the label of the selected probe while the upper display shows its value.
6
OTHER DISPLAY INFORMATION
6.1
READ
THE
SET
POINT
VALUE
Press and release the SET key:
If the unit is on standby:
•
lower display shows SEtC (set chiller);
•
press SET key again, lower display shows SEtH (set heat pump, if it is enabled);
•
press SET key again, lower display shows SEtr (set real of operation, in the case where the Energy
Saving and / or function dynamic set point are active);
•
press SET key again, lower display shows SEtS (set sanitary circuit, in case it is enabled)
If the instrument is in chiller operation:
•
lower display shows SEtC (set chiller);
•
press SET key again, lower display shows SEtr (set real of operation, in the case where the Energy
Saving and / or function dynamic set point are active);
•
press SET key again, lower display shows SEtS (set sanitary circuit, in case it is enabled)
If the instrument is in chiller operation:
•
lower display shows SetH (set heat pump);
•
press SET key again, lower display shows SEtr (set real of operation, in the case where the Energy
Saving and / or function dynamic set point are active);
•
press SET key again, lower display shows SEtS (set sanitary circuit, in case it is enabled)
