7
Keystone
OM9 - EPI2 PrOfIbus DPV1 IntErfacE
InstallatIon & MaIntenance InstructIons
• Connect the 8-pins connector to connector J3 on OM9 (Figure 18)
fIGurE 18
fIGurE 19
4.3 assembling procedure for models 63-125 nm new version (us or no us market)
• Detect the black cable required for the OM9 which is already included in the basic
actuator (figure 19).
• Connect the flat cable furnished into the kit to connector J1 on OM9 (Figure 20).
fIGurE 20
• Place the OM9 card onto the heatsink spacers and tighten the 4 screws; assemble
local mechanical indicator (figure 17).
fIGurE 17
