Emerson Fisher EWD Instruction Manual Download Page 34 | Manualshive

Page: 34 / 60

background image

Instruction Manual

D100399X012

EW Valve

July 2017

34

HIGH‐SEAL and ENVIRO‐SEAL Packing Retrofit Kits

Retrofit kits include parts to convert valves with existing standard bonnets to the HIGH‐SEAL or ENVIRO‐SEAL packing
box construction. Refer to figure 17 for key numbers for HIGH‐SEAL packing. For ENVIRO‐SEAL packing, refer to figure
18 for PTFE packing key numbers, figure 19 for Graphite ULF packing key numbers, and figure 20 for duplex packing
key numbers.

Stems and packing box constructions that do not meet Emerson stem finish specifications, dimensional tolerances,
and design specifications, may adversely alter the performance of this packing kit.

HIGH‐SEAL Packing Retrofit Kits

Stem Diameter, mm (Inches)

Yoke Boss Diameter, mm (Inches)

12.7 (1/2)

71 (2‐13/16)

19.1 (3/4)

90 (3‐9/16)

25.4 (1)

127 (5)

31.8 (1‐1/4)

127 (5, 5H)

4200 psi Process Pressure Rating (Contains keys 200

through 212)

11B2182X052

11B2184X052

11B2187X052

11B2189X052

ENVIRO‐SEAL Packing Retrofit Kits

Stem Diameter, mm (Inches)

Yoke Boss Diameter, mm (Inches)

12.7 (1/2)

71 (2‐13/16)

19.1 (3/4)

90 (3‐9/16)

25.4 (1)

127 (5)

31.8 (1‐1/4)

127 (5, 5H)

Double PTFE (Contains keys 200, 201, 211, 212, 214,

215, 217, 218, tag, cable tie)

RPACKXRT022

RPACKXRT032

RPACKXRT042

RPACKXRT052

Graphite ULF (Contains keys 200, 201, 207, 208, 209,

210, 211, 212, 214, 217, tag, cable tie)

RPACKXRT272

RPACKXRT282

RPACKXRT292

RPACKXRT302

Duplex (Contains keys 200, 201, 207, 209, 211, 212,

214, 215, 216, 217, tag, cable tie)

RPACKXRT222

RPACKXRT232

RPACKXRT242

RPACKXRT252

ENVIRO‐SEAL Packing Repair Kits

Repair kits include parts to replace the ”soft” packing materials in valves that already have ENVIRO‐SEAL packing
arrangements installed or in valves that have been upgraded with ENVIRO‐SEAL retrofit kits. Refer to figure 18 for key
numbers for PTFE packing, figure 19 for key numbers for Graphite ULF packing, and figure 20 for key numbers for
duplex packing.

Stems and packing box constructions that do not meet Emerson stem finish specifications, dimensional tolerances,
and design specifications, may adversely alter the performance of this packing kit.

ENVIRO‐SEAL Packing Repair Kits

Stem Diameter, mm (Inches)

Yoke Boss Diameter, mm (Inches)

12.7 (1/2)

71 (2‐13/16)

19.1 (3/4)

90 (3‐9/16)

25.4 (1)

127 (5)

31.8 (1‐1/4)

127 (5, 5H)

Double PTFE (Contains keys 214, 215, 218)

RPACKX00202

RPACKX00212

RPACKX00222

RPACKX00232

Graphite ULF (Contains keys 207, 208, 209, 210, 214)

RPACKX00602

RPACKX00612

RPACKX00622

RPACKX00632

Duplex (Contains keys 207, 209, 214, 215)

RPACKX00302

RPACKX00312

RPACKX00322

RPACKX00332

«
...
32
33
34
35
36
...
»

Summary of Contents for Fisher EWD





























































Reviews:

No comments

Related manuals for Fisher EWD

Brand: Hamworthy Pages: 10

Concord express

Brand: GE Pages: 3

Brand: HandyTrac Pages: 14

Brand: TA Pages: 6

Brand: YASKAWA Pages: 49

Brand: M-system Pages: 17

Brand: ZKTeco Pages: 6

Brand: Radionics Pages: 14

Brand: µ-Dimension Pages: 48

Brand: µ-Dimension Pages: 2

Brand: GI.BI.DI Pages: 60

DuoControl Signal 111

Brand: Tormatic Pages: 3

767-4803/000-800

Brand: WAGO Pages: 80

Brand: S&C Pages: 24

Brand: M-system Pages: 7

Ambience Control 1

Brand: EuroLite Pages: 20

Brand: SKF Pages: 88

iEP-5000G Series

Brand: ASROCK Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands