Emerson ControlWave, Instruction Manual

Page: 114 / 156

ControlWave Instruction Manual (CI-ControlWave)
5-14 Service & Troubleshooting Revised Nov-2010
Module /
Board
LED Name LED Color Function and Location
SCB CR4 – ENET Port 2 Red/Green ON RED = Data Collision (Left – see Figure 5-
11 .)
SCB CR4 – ENET Port 2 Red/Green ON GREEN = Receiving data (Left – see
Figure 5-11 .)
SCB CR4 – ENET Port 2 Red/Green ON RED = Transmitting data (Right – see
Figure 5-11 .)
SCB CR4 – ENET Port 2 Red/Green ON GREEN = Link O.K. (Right – see Figure 5-
11 .)
SCB CR5 – ENET Port 3 Red/Green ON RED = Data Collision (Left – see Figure 5-
11 .)
SCB CR5 – ENET Port 3 Red/Green ON GREEN = Receiving data (Left – see
Figure 5-11 .)
SCB CR5 – ENET Port 3 Red/Green ON RED = Transmitting data (Right – see
Figure 5-11 .)
SCB CR5 – ENET Port 3 Red/Green ON GREEN = Link O.K. (Right – see Figure 5-
11 .)
CPU PORT 80 DISPLAY Red LEDs LED Matrix displays status codes. See Figure
5-11. See Table 5-3 & 5-4.
AI AI Board Status Red/Green ON RED = Fail state/ board not recognized
ON GREEN = Normal state. See Figure 5-12
AI Range (16 LEDs – one per
point) Red LED ON = AI over-range or AI under-range
condition. See
Figure 5-12
AI Range (16 LEDs – one per
point) Green LED ON = AI in range. See Figure 5-12
AO AO Board status fail Red LED ON = AO board fail state / board not
recognized. See
Figure 5-13 .
AO AO Board status pass Green LED ON = AO board normal or O.K. state.
Figure 5-13 .
DI DI Board status Red/Green ON RED = DI board fail state; board not
recognized.
ON GREEN = DI board normal state. See
Figure 5-14 .
DI DI board inputs (32 LEDs – 1
per point) Red LED ON = Input is present.
LED OFF = Input is not present. See Figure 5-
14 .
DO DO Board status Red/Green ON RED = DO board fail state; board not
recognized.
ON GREEN = DO board normal state. See
Figure 5-15.
DO DO board outputs (32 LEDs –
1 per point) Red LED ON = Output is ON. See Figure 5-15.
UDI UDI Board Status Fail Red LED ON = UDI board fail state/board not
recognized. See
Figure 5-16 .
UDI UDI Board Status Pass Green LED ON = UDI board normal or O.K. state.
See
Figure 5-16 .
UDI UDI Input (12 LEDs – 1 per Red LED ON = UDI input activity.