ControlWave Instruction Manual (CI-ControlWave)
Figure 5-2. HyperTerminal
(Ready to Download)
8.
In the Send File dialog box (see
), select
1KXmodem
for the protocol, enter the filename of the appropriate .bin file in
the format “CWP
xxxxx
.bin” (where
xxxxx
varies from release to
release) and click
Send
to start the flash upgrade (see
). When you see the HyperTerminal Mode Menu again, it
means the download has completed.
9.
Exit HyperTerminal and power down the ControlWave. If
desired, you can disconnect the null modem cable between the
ControlWave and the PC.
10.
Set CPU switch SW3-3 to
OFF
(Recovery Mode Disabled).
11.
Restore power to the ControlWave.
Figure 5-3. Send File dialog box
5-4
Service & Troubleshooting
Revised Nov-2010
