3. Ceiling Fan Assembly
M5 x 16 mm FLANGE HEAD
BLADE SCREWS (3 per blade)
SLIDE FAN BLADE
INTO BLADE
CENTER SLOT
FAN BLADE
BLADE SLOT
FAN MOTOR
ASSEMBLY
Figure 1
REMOVE M4 x 10 mm
PAN HEAD SCREW
LOWER HOUSING
KEY HOLE
SLOT (2)
FAN MOTOR
ASSEMBLY
Figure 2
3.1
Position the Fan Motor Assembly upside down in
preparation for mounting the three fan blades.
Slide the Blade through blade slot in Fan Motor Assembly.
Mount the Blade to Fan Motor Assembly using three
M5 x 16 mm Flange Head Blade Screws (supplied)
(Figure 1).
NOTE: Take care not to scratch Fan Motor Assembly
when installing Blades.
Complete the remaining two blades installation per the
above instructions.
3.2
Remove one of the three M4 x 10 mm Pan Head Screws
in the Fan Motor Assembly and loosen the remaining two
screws (Figure 2).
Attach the Lower Housing to the Fan Motor Assembly by
rotating the Lower Housing clockwise to engage the
loosened screws in the two key slots (Figure 2).
Secure the Lower Housing by tightening the two
previously loosened M4 x 10 mm Pan Head Screws.
Reinstall the Screw that was previously removed.
A spare M4 x 10 mm Pan Head Screw supplied in parts
bag, if needed.
5
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF245L & CF253L
To reduce the risk of personal injury, do not bend the
blades during installation, balancing the blades or
cleaning the fan. Do not insert foreign objects in between
rotating fan blades.
WARNING
!
