6
U.L. Model No.: CF245L & CF253L
3. Ceiling Fan Assembly
(Continued)
PHILLIPS HEAD SET SCREW (LOOSENED)
HANGER BALL
4.5" DOWNROD
PIN
GREEN GROUND WIRE
Figure 3
3.3
Carefully turn the partially assembled ceiling fan right side
up and place the fan securely into the packing styrofoam
in preparation for final assembly.
Remove the Hanger Ball by loosening the Phillips Head
Set Screw in the Hanger Ball until the Ball falls freely down
the Downrod (Figure 3).
Remove the Pin from the Downrod, then remove the
Hanger Ball (Figure 3).
Retain the Pin and Hanger Ball for reinstallation in
Step 3.10.
Note: Do not loosen the Screw that attaches the Green
Ground Wire to the Hanger Ball.
4.5" DOWNROD
THREE 80" MOTOR
LEADS (UNTWISTED)
Figure 4
3.4
Separate, untwist and unkink the three 80” Motor Leads.
Route the three 80” Black, Blue, and White Motor Leads
through the Downrod (Figure 4).
