21
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF245L & CF253L
TO INSTALL BRACKET
TO WALL:
INSTALL THE TWO SCREWS
SLIDE THE COVER DOWN
WALL
BRACKET
SCREWS (2)
COVER
8. Remote Control Procedures
(Continued)
8.7: Storage Bracket Installation
A Storage Bracket is provided for holding your Remote
Control when not in use. If you desire to use the Bracket,
install it on a wall that is away from excess heat or
humidity.
Slide the Wall Bracket Cover up to expose the screw
holes for installation (Figure 37).
Position the Bracket on the wall in desired location.
TO INSTALL BRACKET TO
WALL:
SLIDE THE COVER UP TO
EXPOSE THE SCREW
HOLES FOR INSTALLATION
COVER
WALL
BRACKET
SCREW
HOLES (2)
Figure 37
Figure 38
8.8: Storage Bracket Installation
Install the two screws (provided with bracket) into the Wall
Bracket and tighten to secure to wall (Figure 38).
Slide the Wall Bracket Cover back down over the screws.
8.6
To turn the Downlight on, press and release the ( )
button. The Light will turn on at the light intensity
previously selected (Figure 36).
To vary the intensity of the Light, hold the ( ) button
down until the desired light intensity is reached, then
release the button (Figure 36).
NOTE: When turning the Light on, power indicator
light on Remote Control will turn on at the light
intensity previously selected.
Your Remote Control has full control of your fan and light.
The power indicator light will illuminate while any button is
pressed, indicating that the battery is good.
POWER INDICATOR
LIGHT
LIGHT INTENSITY
BUTTON
Figure 36
