7
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF245L & CF253L
3. Ceiling Fan Assembly
(Continued)
MOTOR
COUPLER
DOWNROD
LOOSEN PHILLIPS
HEAD SET
SCREWS (2)
Figure 5
HAIRPIN
CLIP
CLEVIS
PIN
MOTOR
COUPLER
HAIRPIN
CLIP
CLEVIS
PIN
Figure 6
3.5
Loosen the two Phillips Head Set Screws in the Motor
Coupler for installation of the Downrod (Figure 5).
Seat the Downrod in the Motor Coupler (Figure 5).
Rotate and align the Downrod holes with the two holes in
the Motor Coupler (Figure 5).
3.6
Align the Clevis Pin holes in the Downrod with the holes in
the Motor Coupler.
Install the Clevis Pin and secure with the Hairpin Clip
(Figure 6).
The Clevis Pin must go through the holes in the Motor
Coupler. It is critical that the Clevis Pin in the Motor
Coupler is properly installed and securely tightened.
MOTOR
COUPLER
RETIGHTEN TWO
PHILLIPS HEAD
SET SCREWS
Figure 7
3.7
While pulling up on the Downrod, retighten the two Phillips
Head Set Screws to secure the Downrod in the Motor
Coupler (Figure 7).
NOTE: The Set Screws must be properly installed as
described above, or fan wobble could result.
It is critical that the clevis pin in the motor coupler is
properly installed. Failure to verify that the pin is properly
installed could result in the fan falling.
WARNING
!
It is critical that the set screws in the motor coupler are
properly installed and securely tightened. Failure to verify
that the set screws are properly installed could result in
the fan falling.
WARNING
!
