16
U.L. Model No.: CF245L & CF253L
M4 x 10 mm PAN HEAD SCREW
LOWER
HOUSING
LED LIGHT FIXTURE
ASSEMBLY
Figure 26
6.3
Rotate the LED Light Fixture Assembly clockwise on the
Lower Housing by engaging the two loosened screws onto
the key hole slots (Figure 26).
Secure the LED Light Fixture Assembly by tightening the
two M4 x 10 mm Pan Head Screws.
Reinstall the M4 x 10 mm Pan Head Screw that was
previously removed.
A spare M4 x 10 mm Pan Head Screw supplied in parts
bag, if needed.
6. Final Assembly
(Continued)
6.4
Place the Glass into the opening in the Lower Housing,
aligning the three Flat Areas on the top edge of the Glass
with the three raised Dimples on the Lower Housing and
turn the Glass clockwise until it stops (Figure 27).
NOTE: Periodically check that the Glass is seated fully
clockwise in the Lower Housing.
FLAT AREA (3)
GLASS
LOWER HOUSING
LED LIGHT
FIXTURE
ASSEMBLY
DIMPLES (3)
Figure 27