Emerson Network Power RDU-S, User Manual, Page: 38 / 53

34 Chapter 5 Software Operation
RDU-S Rack Data Unit User Manual
1. Adding NMS
1) Click Add , the window shown in Figure 5-40 will appear.
Figure 5-40 Adding new NMS
2) Select Enable traps for all events and click Apply to send traps for all events.
3) Select SNMP V2c , type a new NMS IP address in NMS IP and keep other parameters in default.
4) Click Apply , the setting is successful; Click Cancel , the setting is cancelled.
5) Select SNMP V3 , the window shown in Figure 5-41 will appear.
Figure 5-41 Select SNMP V3
6) Click Apply , the setting is successful; Click Cancel , the setting is cancelled.
2. Deleting NMS
Select one NMS and click Delete , and the NMS will be deleted.