18 Chapter 5 Software Operation
RDU-S Rack Data Unit User Manual
5.2 Monitor Interface Operation Description
After the user name and password are verified, you can enter the
Monitor
interface, as shown in Figure 5-2.
Structure tree
Operation area
Figure 5-2 Monitor interface
The structure tree in
Environmental
displays the devices connected with the data unit, including temperature sensor,
humidity sensor, input contacts (digital sensor), output relays (relay port output). The operation area provides three
tabs and you can click a tab to enter the corresponding operation interface.
z
Set temperature sensor and humidity sensor, and view the working status of input contacts & output relays and
the last alarms through the
Environmental
tab.
z
View and set the working status of the PDU through the
PDU
tab.
z
View and set the working status of the cameras through the
Camera
tab.
5.2.1 Environmental
Click the
Environmental
tab in the operation area, and the interface shown in Figure 5-2 will appear. You can set the
temperature sensors and humidity sensors, and view the working status of the input contacts & output relays and the
events through the interface.
Temperature sensor
1. Setting temperature parameter
1) Click the
Temperature Sensor
node in the
Monitor
structure tree, and the window shown in Figure 5-3 will
appear.
Figure 5-3 Temperature sensor window
2) Double-click one sensor histogram to enter the edit mode; meanwhile, the serial number of the sensor is visible, as
shown in Figure 5-4.
Summary of Contents for RDU-S
Page 2: ......
