background image

 

 

12 

6.

 

OPERATION OF THE DEVICE 

 

Important! After connecting the EMERALD device, it is necessary to familiarize yourself 

with the operating rules of the device. 

 

Important! Do not use the first 30 liters of purified water immediately after connecting the 

device for  food  purposes . For  prolonged  shutdowns  of  the  device  (more  than  1  day),  the 
first 30 liters of purified water should also be drained . 

The device is designed for cleaning and electric processing ONLY COLD WATER FROM 

SYSTEMS OF CENTRALIZED WATER SUPPLY! In the drinking water preparation mode, 
do not pass warm or hot water through the device, as this may damage it. 

  
Do not use the device for cleaning microbiologically unsafe water or water of unknown 

origin without proper pre-filtration and disinfection. 

 

Cold tap water supply to the device 

Fig. 10. Water supply using the regulator on the diverter.

 

 

To enable the device in the OPERATION mode, it is necessary to open the cold water supply on 

the tap, and then smoothly turn the regulator on the diverter to a horizontal position ( see Fig. 10) so 
that cold tap water begins to flow into the device.

 

 

 

-

 

The vertical position of the regulator on the diverter - water goes to the device;

 

-

 

The horizontal position of the regulator on the diverter - the water drains into the sink.

 

 

 

The device turns on automatically as soon as water begins to flow into it. When the device is 

switched on in the OPERATION mode, the multifunctional LED lights up in one of the corresponding 
modes.

 

 

 

Turning off the device also occurs automatically immediately after the water supply stops. When 

the device is turned off, the multi-function LED turns off.

 

 
 

 

Summary of Contents for Home 4




























Reviews: