Tel: 250.656.5366
Fax: 250.656.5344
Contact: [email protected]
EMCS INDUSTRIES LTD.
Unit 5 - 10114 McDonald Park Rd.
North Saanich, BC V8L 5X8
18
(2)
SAFETY CAPS
MARELCO™
safety caps are hydraulically tested to 100
p.s.i., and approved by Lloyds, C.S.I., the American Bureau of
Shipping and R.I.N.A.
EMCS Ltd. will supply the safety caps to be installed as per
instructions in
Section C.
(3)
ANODES
Standard anodes are constructed of extruded materials.
The highest grades of copper, aluminum, iron, and other
metals are used. Anodes can be formed to any configuration
allowing flexibility in positioning and arranging anode
locations. Various anode stud diameters are used to meet
military and ice breaking standards.
(i)
MG Anodes
The MG anode is constructed of specially alloyed extruded material principally copper, plus various
alloys. It is always employed in conjunction with the TRAP (fC) anode. It reacts with sea water to produce
an environment that prevents biological fouling (I.E. shellfish, spat, spawn, etc.) from inhabiting.
(ii)
Trap (TC) Anode
The Trap (TC) anode is constructed of specially alloyed extruded materials principally aluminum or iron,
plus various other alloys. It produces a colloidal suspension to support the products of the MG anode.
The size and shape of anodes vary according to the dimensions of the sea chest, pipes, gratings, water
conditions, flow rates and dry docking schedules.
Only in exceptional circumstances will the weight of anodes exceed man-handling proportions. Each
anode is stamped with a number corresponding to its position on the drawing. The number will be found
on the side of each anode, just below the tape.
Summary of Contents for NOXX MARELCO
Page 1: ...0 P a g e...
