DPSI LCD Operating Instructions
Version 1.0
Page 12 of 32
•
Quick blinking of both blue LEDs indicates failsafe issues of
both receivers simultaneously! This state is critical also,
because both receivers were malfunctioning during operation
at least for a short time!
Summary:
LED Status
Indication
Red LED on
Low voltage (battery almost discharged)
Red LED blinks
Battery fault (malfunction) or voltage < 5.0 V
Yellow LED on
Low battery capacity => charge battery
Yellow LED off
Battery voltage ok
Green LED on
Receiver signal ok
Green LED off
No receiver signal, receiver defective or a
defined failsafe signal of the receiver
Blue LED on
This receiver provides actually the signals for
servos connected to the DPSI
Blue LEDs blinks
Both receivers malfunctioned during operation
simultaneously
Hint:
Fast blinking of a LED indicates a critical situation which can lead to a breakdown
of the total system!
Hint:
In order not to be dazzled by the LEDs when reading the LC-Display, the LEDs
can be turned off and back on by pushing the “SET“-button momentarily.
