DPSI LCD Operating Instructions
Version 1.0
Page 13 of 32
7. Readouts of the LC-Display
The LC-Display indicates all information in plain text using 3 lines, 12
characters each. The display varies, depending on which DPSI system
the DPSI LCD is connected to.
Display in respect to receivers (e.g. receiver switch):
-
The currently active receiver
-
How often the system switched receivers
-
The receiving quality
-
The servo position of the failsafe channel
-
Indication of the operating mode (Failsafe or Master/Slave
=> Teacher/Student)
-
Display of current receiver voltage
-
Flight-time (operating time in minutes)
Display in respect to power supply (e.g. battery switch):
-
Actual voltage battery 1 and battery 2
-
Maximum voltage battery 1 and battery 2
-
Minimum voltage battery 1 and battery 2
-
Display of current receiver voltage
-
Actual current battery 1 and battery 2
-
Average current battery 1 and battery 2
-
Maximum current battery 1 and battery 2
-
Withdrawn capacity of battery 1 and battery 2
-
Flight-time (operating time in minutes)
Withdrawn capacity (in milli-ampere-hours mAh) and operating time
can be reset on users demand (=> reset menu).
Hint:
The DPSI LCD displays two times: a total time (that is the time, the system stores
every 30 seconds and which can be reset by the user) and the time of the actual
turn on cycle (A) which is automatically set to zero at power off.
