DPSI LCD Operating Instructions
Version 1.0
Page 3 of 32
1. Preface
With the DPSI LCD you purchased a high grade, modern and secure
product. We appreciate your trust!
Long lasting experience for years in development and manufacturing of
electronically systems as well as the knowledge of the world’s best
model airplane pilots has influenced the development. All products are
developed by experienced engineers and manufactured at EMCOTEC
GmbH in Germany on our own production line. Extensive optically and
electronically end tests for every system, which leaves our house,
assure that you, our customer acquire an absolute reliable product,
which considerably increases the reliability of your valuable RC-Model.
Of course, the DPSI LCD (just like all products from EMCOTEC) not
only has been tested extensively in the laboratory, but also went
through intensive flight-testing. Like done in the automobile industry an
FMEA (Failure Mode and Effect Analysis) reduces the possibility of
damage and malfunction on operating errors to a minimum.
Hint:
We kindly ask you to read these operating instructions carefully and observe the
installation hints. Thus, errors can be avoided in advance.
We are all ears for your wishes and questions. Challenge us!
Bobingen, January 2008
The Staff of EMCOTEC GmbH