DPSI LCD Operating Instructions
Version 1.0
Page 14 of 32
7.1. Readout after Power-On
When turning the DPSI LCD on (or
connecting it) the starting frame is displayed
for about 2 seconds. Here one can see
which DPSI system is supported (here:
DPSI TWIN Mini).
Now one can see how the system is
programmed (Failsafe or Master/Slave
mode). At the same time, the corresponding
switching values (= servo positions) are
displayed in ms or %.
For additional 4 seconds, the current servo
positions of both failsafe channels are
displayed (in ms or in %). This is for quick
control.
Optional Display:
In case the system is in Master/Slave mode
it will be optionally displayed. The numbers
indicate the threshold where switching
between Master (Teacher) and Slave
(Student) occurs.
Here too, the current servo positions of both
failsafe channels are displayed for
additional 4 seconds.
Hint:
Depending on the DPSI system the DPSI LCD is connected to, information
displayed varies after power on. Frames are only exemplarily described. Since
depicted information is self-explanatory, differences in other systems are not
further described.
