RELEASED: 10/2/2006
Page 6
COMMUNICATI0NS
HSD SERIES OPERATION AND MAINTENANCE
This is an unpublished work protected by the United States copyright laws and is proprietary to EMCEE Communications.
Disclosure, copying, reproduction, merger, translation, modification, enhancement or use by anyone other than authorized
employees or licensees of EMCEE Communications without the prior written consent of EMCEE Communications is strictly
prohibited.
Copyright © 2006 EMCEE Communications. All rights reserved.
This copyright notice should not be construed as evidence of publication.
1.2 Safety Warnings and Precautions:
This section provides information related to the safe installation and use of the
EMCEE HSD-2500. It contains the following sections:
o
Safety
Considerations
o
Safety with electricity
o
Preventing Electrostatic Discharge Damage
o
Emission
Notice
1.2.1 Safety Considerations:
Follow these guidelines to ensure general safety:
•
Keep the chassis area clear and dust free during and after installation.
•
Keep tools away from walkways where you and others could trip over them.
•
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or
scarf and sleeves.
•
Wear safety glasses when working under conditions that might be hazardous to your
eyes.
•
Do not perform any action that creates a hazard to people or that makes equipment
unsafe.
1.2.2 Safety with Electricity:
Warning!
This warning symbol means danger. You are in a situation that could
cause bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for preventing
accidents.
Warning!
Before working on equipment that is connected to power lines, remove
jewelry (including rings, necklaces, and watches). Metal objects will heat up when
connected to power and ground and can cause serious burns or weld the objects to
the terminals.
Warning!
Unplug the power cord before you work on any system that does not have
an on/off switch.
