EMC2 VNX VG2 Hardware Information Manual Download Page 4 | Manualshive

Page: 4 / 43

background image

How this document is organized

EMC VNX VG2/VG8 Hardware Information Guide

3

How this document is organized

The major sections of this guide are listed in the following table.

Related documentation

EMC provides the ability to create step-by-step planning, installation, and maintenance
instructions tailored to your environment. To create VNX customized documentation, go
to:

https://mydocs.emc.com/VNX/

.

To download a PDF copy of the desired publication, go to the following sections:

◆

For hardware-related books, go to the About VNX section, and then select Learn about

VNX. Next, follow the steps in the wizard.

◆

For technical specifications, go to the About VNX section, and then select View

technical specifications. Next, follow the steps in the wizard.

◆

For installation, adding, or replacing tasks, go to the VNX tasks section, and then

select the appropriate heading. For example, to download a PDF copy of the

VNX5100

Block Installation Guide

, go to Install VNX and follow the steps in the wizard.

◆

For server-related tasks, go to the Server tasks for the VNX5100 section, and then

select the appropriate heading. For example, to download a PDF copy of Adding or
replacing hardware, go to Add or replace hardware and follow the steps in the wizard.

Title

Description

“VNX VG2 overview” on page 4

Describes and shows the front and rear views of a typical

VNX VG2 gateway.

“VNX VG8 overview” on page 6

Describes and shows the front and rear views of a typical

VNX VG8 gateway

“Component description” on

Describes the components that comprise the VNX VG2 or VG8

gateway.

“Control Station front view” on

Describes and illustrates the front view of a Control Station.

“Data Mover enclosure front

view” on page 13

Describes and illustrates the front view of a Data Mover

enclosure.

“Control Station rear view” on

Describes and illustrates the rear view of a Control Station.

“Data Mover enclosure rear

view” on page 22

Describes and illustrates the rear view of a Data Mover

enclosure.

“Management module” on

Describes and illustrates the rear view of the Management

Module.

“I/O modules” on page 25

Describes and illustrates all the I/O modules supported by the

VNX VG2/VG8 gateways.

«
...
2
3
4
5
6
...
»

Summary of Contents for VNX VG2












































Reviews:

No comments

Related manuals for VNX VG2

Brand: Yeastar Technology Pages: 17

Brand: Hoymiles Pages: 2

Brand: Echelon Pages: 3

Brand: Synway Pages: 7

Brand: Veratron Pages: 79

Brand: NETGEAR Pages: 10

Brand: NetPurifier Pages: 49

Brand: Samson Pages: 72

Catalyst 8200 Series

Brand: Cisco Pages: 8

Brand: Sunfull Pages: 2

Brand: Telecom FM Pages: 79

Brand: Technicolor Pages: 6

HomePortal 3700HG

Brand: 2Wire Pages: 4

Brand: Voptel Technology Pages: 67

Brand: Blonder tongue Pages: 8

Xfinity DPC3939

Brand: Comcast Pages: 8

VoIP 2 ALL Series

Brand: Discovery Telecom Pages: 79

intelligent Touch Manager BACnet DCM014A51

Brand: Daikin Pages: 148

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands