EMC2 VNX VG2, Hardware Information Manual

Page: 23 / 43

22 EMC VNX VG2/VG8 Hardware Information Guide
Component description
Data Mover enclosure rear view
The rear of the VNX VG2/VG8 2U Data Mover enclosure does not contain any LEDs, as
shown in
Figure 8 on page 13 . Only the management module and the I/O modules have
LEDs.
Note: Figure 17 is a graphical representation of the VNX VG2 2U Data Mover enclosure rear
view with two Data Movers (each Data Mover has one management module, one four-port
8-Gb/s FC I/O module, thee two-port 1-Gb/s plus two-port 1-Gb/s optical I/O modules,
and one filler module).
Figure 17 Data Mover enclosure rear view
Management module
The management module on the 1U Control Station provides the management
connections via three 10/100/1000 Ethernet (RJ-45) ports. The management module also
includes one RS-232 (EIA) DB-9 serial socket connector for service laptop connection and
several LEDs, as shown in
Figure 18 on page 23 .
1 Data Mover enclosure 4 Four-port 8-Gb/s FC I/O module (for closer
view, see Figure 23 on page 28 )
2 Filler panel module 5 Management module (for closer view, see
Figure 18 on page 23 )
3 Two-port 1-Gb/s copper plus two-port
1-Gb/s optical I/O module (for closer view,
see Figure 27 on page 32 )
0
12
3
0
12
3
0
1
23
0
12
3
0
12
3
0
1
23
0
12
3
0
12
3
0
12
3
0
1
23
1
2 3 5 4
CNS-001767