EMC2 VNX VG2 Hardware Information Manual Download

Page: 11 / 43

EMC VNX VG2/VG8 Hardware Information Guide

Component description

◆

Any required cables including LAN cables, modem cables, serial DB-9 cable, and IPMI

cable.

◆

Mounting rails with hardware

◆

Front bezel with VNX VG8 badge

Component description

This section provides the exact details of the VNX VG2 and VNX VG8 components. These
details include illustrations and descriptions of the front and rear controls, connectors,
and LED indicators.

The components are:

◆

“VNX VG2/VG8 front view” on page 10

• 1U Control Station

• 2U Data Mover enclosure

– Power supply/cooling (fan) modules

– CPU modules

◆

“VNX VG2/VG8 rear view” on page 16

• 1U Control Station

• 2U Data Mover enclosure

– Management modules

– I/O modules

VNX VG2/VG8 front view

On the front, viewing from top to bottom, a VNX VG2 or a VNX VG8 gateway can include the
following hardware:

VNX VG2 front view

◆

One to two 1U Control Stations

◆

2U Data Mover enclosure (one to two Data Movers)

• Power supply/cooling (fan) modules

• CPU modules

Figure 5 on page 11

shows an example of a VNX VG2 gateway and the orientation of the

hardware components on the front of the gateway.

VNX VG8 front view

◆

One to two 1U Control Stations

◆

One to four 2U Data Mover enclosures (two to eight Data Movers)

• Power supply/cooling (fan) modules

• CPU modules

Summary of Contents for VNX VG2












































Search results

Summary of Contents for VNX VG2

Reviews:

Related manuals for VNX VG2

Brands by name

Popular brands

EMC2 VNX VG2, Hardware Information Manual

Search results

Summary of Contents for VNX VG2

Reviews:

Related manuals for VNX VG2

Brands by name

Popular brands