4
4-8
EMC Fibre Channel with QLogic HBAs in the Windows Environment
Installing and Configuring the QLogic QLA4010 iSCSI HBA (TOE)
Configuring iSNS settings for QLA4010
For iSNS support, the QLA4010 must be running the correct driver
(see the EMC Support Matrix for latest version.)
Targets must register with the iSNS server. To register, enable the
iSNS server and enter the IP address using the SANsurfer GUI. Click
Save HBA
under the
Network
dialog box in the GUI. The target
should be detected by SANsurfer in the
Target Settings
dialog. Click
SAVE Settings
to bind the targets.
If the targets are not detected, follow these steps:
1. Ping successfully to the iSNS server using
Diagnostics
tab from
SANsurfer iSCSI HBA Manager
window.
2. Go to iSNS server and iSNS server icon in the control panel or
desktop
3. Open
Discovery Domain
and confirm that both the QLA4010
and target ports are registered with the domain.
QLogic_Windows.book Page 8 Thursday, March 10, 2005 10:31 AM
