3
3-32
EMC Fibre Channel with QLogic HBAs in the Windows Environment
Configuring an EMC Boot Device
• If there are multiple QLogic HBAs, a list of addresses occupies
by those HBAs appears. Use the arrow keys to select the
desired HBA; then press
ENTER
. The
Fast!UTIL Options
menu
appears.
3. Select
Configuration Settings
from the menu.
4. Select
Selectable Boot Settings
from the
Configuration Settings
menu.
The first
Boot Port Name
entry should already be configured (as
described under
Configuring the HBA Boot BIOS
on page 3-23).
If you want another SP port to be accessible as a potential boot
path to the current owner SP, select the next
Boot Port Name
entry, and in the
Device
window select the CLARiiON port
WWN from which you want to boot.
5. If you have other HBAs for which you want to assign
Boot Port
Name
entries, you can press
ESC
to go back to the main menu,
save changes, and select another HBA as shown in step 2. If the
other HBA you wish to configure has its own
CTRL-Q
BIOS
prompt, reboot the server and configure that HBA's
Boot Port
Name
entries as you have done here.
6. Trespass the LUN and repeat steps 1 through 5 to configure any
paths over which you want to be able to boot the LUN from the
other SP.
To trespass the LUN, follow the instructions in the EMC
ControlCenter Navisphere Management software documentation
for your array type. The process depends on the failover software
installed:
• With PowerPath configurations, this can usually be done from
the EMC ControlCenter Navisphere Management software
GUI by right-clicking the desired LUN and selecting
trespass
.
Confirm in the LUN properties that the LUN has trespassed
before you return to configure the remaining
Boot Port Name
entries.
• With ATF configurations:
– With FC-series array core code 8.45.x, this can usually be
done from the EMC ControlCenter Navisphere
Management software GUI by right-clicking on the desired
LUN and selecting
trespass
. Confirm in the LUN
properties that the LUN has trespassed before you return
to configure the remaining
Boot Port Name
entries.
QLogic_Windows.book Page 32 Thursday, March 10, 2005 10:31 AM
