3
Configuring a CLARiiON Boot Device
3-33
Configuring an EMC Boot Device
– With FC-series array core code 8.44.x and earlier, you will
use the
atf_trespass
command to trespass the boot LUN.
To do this, follow the steps under
Trespassing the Boot LUN
Using atf_trespass
on page 3-33.
Each HBA can support multiple entries; you should configure
Boot Port
Name
entries connecting to multiple ports on both SPs for maximum
redundancy in booting after a boot LUN trespass or other link failures.
Refer to Table 3-1 on page 3-37 to determine your high-availability
requirements.
7. When all parameters are set correctly and you have added
Boot
Port Name
entries for all the SP ports from which you would like
to attempt to boot, press
ESC
to return to the
Fast!UTIL
Options
menu; then select
Save Changes
to save the changes you made to
the current adapter.
8. Press
ESC
to exit the
Fast!UTIL
Options
menu.
9. Reboot the server.
Trespassing the Boot
LUN Using atf_trespass
Follow these steps to use the
atf_trespass
command to trespass the
boot LUN:
1. Boot the host and log in to Windows.
2. Windows NT 4.0 will have the boot LUN configured for ID 0 as
described under
Preparing the Storage System
on page 3-17.
For Windows 2000, follow these steps to determine the LUN ID of
the boot LUN as seen by the host:
a. From the Windows task bar, select
Start, Programs,
Administrative Tools, Computer Management
.
b. On the
Computer Management
window, click
Disk
Management
.
c. Locate the System disk in the list. This is typically Drive
C:\
and will be noted with
(System)
.
d. Select the
Disk X
description area, and from the
Action
menu,
select
Properties
.
A display appears with a line similar to the following:
Device Type: SCSI (Port: 3, Target ID: 1, LUN:0)
QLogic_Windows.book Page 33 Thursday, March 10, 2005 10:31 AM
