52
Install - Step 14 continued
Configure and register iSCSI connections
9. Click
Logon
to connect to the selected target. Click
OK
.
10. Repeat steps 6 – 9 for any other target to which you want to log in.
11. Click
Next
. The
Server Registration
window opens and lists all connected storage
systems. Make certain that a path is shown for each connection. If paths are
missing, ensure that you are logged in to the expected targets.
12. In the
Server Registration
window, click
Next
to send the updated information to
the storage system and register the server with all connected storage systems. The
wizard displays a success message.
13. Click
Finish
to close the wizard.
For iSCSI HBAs
On
each server
that connects to the storage system with a QLogic iSCSI HBA
:
1. Open QLogic SANsurfer and configure
Target Settings
for your server as
described in the QLogic documentation.
2. Start the Unisphere Server Utility:
Start > Programs > EMC > Unisphere > Unisphere Server Utility
or
Start > All
Programs > EMC > Unisphere > Unisphere Server Utility
3. Select
Register this server to all connected storage systems
, and click
Next
.
4. Click
Next
to send the server information to the storage system.
5. Click
Finish
to exit the utility.
The utility sends the initiator records for the HBA initiators in the server to each storage
system that is connected to the server.
