50
Install - Step 14
Configure and register iSCSI connections
Configure an iSNS client on the storage system - Windows only
If your system uses an iSNS server,
you must configure the iSNS client on the
storage system with Unisphere or Navisphere Manager.
•
For Unisphere - Select
All Systems
>
System List
, and select a storage system for
which you want to establish an iSNS connection. From the
System
view, select
iSNS
.
•
For Navisphere Manager - In the
Storage
tree, right-click the icon for the storage
system for which you want to establish an iSNS connection, click
iSCSI
and then
click
iSNS
.
Configure iSCSI connections and register the server
Configure the logical connections between iSCSI initiator ports on each attached
server and the storage system’s iSCSI data ports (targets).
Network interface cards (NICs) use the Unisphere Server Utility wizard to configure
connections; iSCSI host bus adapters use the QLogic SANsurfer utility.
For NICs
On
each server
that connects to the storage system with a NIC:
1. Open the Unisphere Server Utility:
Start > Programs > EMC > Unisphere > Unisphere Server Utility
or
Start > All
Programs > EMC > Unisphere > Unisphere Server Utility
2. Select
Configure iSCSI Connections on this server
and click
Next
.
3. Select
Configure iSCSI Connections
and click
Next
.
