21
Install - Step 1 continued
Install the storage-system hardware
Connect the storage-system back-end ports
If your storage system arrived already installed in a cabinet/rack, make any necessary
cabinet-to-cabinet connections. Match the labels on disconnected cables from expansion (EXP)
to empty disk enclosure PRI ports in the next cabinet. Then continue with "Connect power
cables" (page 23).
1. Use SFP-HSSDC2 copper cables to attach slot 0, port 0 on each storage processor
(SP) to the corresponding PRI ports on the enclosure that includes the specially
marked “array software” disks (this should be the first DAE above the SPE).
Orient the HSSDC2 connectors as shown. The connector thumb clip faces up when connecting to
LCC B and down when connecting to LCC A. An audible/tangible click indicates that the cable is
completely seated in the LCC connectors
.
!
!
!
!
!
EX
P
PR
I
EX
P
PRI
#
!
EX
P
PR
I
EX
P
PR
I
#
A
B
EMC3244
To Previous Enclosure
PRI
Connector
PRI
PRI
Thumb Clip Up
To Previous Enclosure
PRI
Connector
PRI
PRI
Thumb Clip Down
