6
Serial/Ethernet Communication (SCOM) Interface
IND100084-15
Installing API/VCOM Drivers
In order to access and communicate with the Panel Computer (MMC) units (no need on MMD/STD, use SCOM), it
may or may not already have pre-installed drivers depending on factory defaults. If you need to install or re-install
drivers, please follow the instructions as described below:
Note: Drivers available for Microsoft® Windows® Operating System only (32 and 64bit).
For Linux OS, Please refer to DOC101163-1 via:
https://www.hattelandtechnology.com/hubfs/pdf/misc/doc101163-1_hatteland_display_api_qm57.pdf
1: From the “Drivers and Documentation DVD” (MEDIA STD-007 or higher) that are included in the package contents.
Path Location (where G:\ is your media drive, either External CD-rom or USB/Memory Stick drive):
G:\Current_Products\Panel_Computers\MMC_SeriesX\Drivers\Product_Range_02\Hatteland_Display\
From within the directory, execute the
Hatteland_Driver_Setup_QM57-
x.x.xxx
.exe
where
x.x.xxx
refers to current driver revision (example 1.3.385)
- or visit our website and download driver package from:
-
https://www.hattelandtechnology.com/hubfs/drivers/hdmmc_seriesx_drivers.zip
- Unpack (important) the .zip file onto a location on your storage device. Execute the “menu_run.exe” from root.
2: Click the “Install API Prerequisite”
package from Microsoft® and follow
their instructions.
3: Click the “Install Hatteland Display® API Drivers” and follow the
instructions.
* Illustration Only. Actual text and version numbering on screenshot above may have been revised since the writing of this manual.
4: You can now access the VCOM functionality.
