Embraer ERJ-190 Series (GE CF34)
ATA 05
– ATA12
B1.1. and B2
AIRPLANE GENERAL
ISSUE 1, 24 Sep 2014
FOR TRAINING PURPOSES ONLY
Page:
52
ATA 05 TIME LIMITS AND MAINTENANCE CHECKS
INTRODUCTION
Chapter 05, time limits and maintenance checks of the aircraft maintenance
manual, provides inspection procedures for various scheduled and
unscheduled checks.
The data concerning detailed time limits and scheduled maintenance checks
can be found in the "Maintenance Planning Guide".
SCHEDULED MAINTENANCE CHECKS
Some examples for scheduled checks:
05-21-00-211-802 Center-Fuselage I and II Lower Portion and Keel Beam at
areas covered by Forward Wing-to-Fuselage Fairing - Internal General Visual
Inspection
05-21-00-211-803 Forward Pressure Bulkhead and Radome
– Internal
General Visual Inspection
05-22-00-211-801 Horizontal Stabilizer, Horizontal Stabilizer Fairings
(Leading Edge and Tips) - Internal
05-22-00-211-802 Horizontal Stabilizer Fairings (Sliding Plate and Fairing),
Rear Fuselage Skin Covered by Horizontal Stabilizer Fairings - Internal
General Visual Inspection
05-23-00-211-801 Pylon And Wing Lower Skin Panel Covered By Pylon
Fairing
– Internal General Visual Inspection
05-23-00-211-802 Inlet Cowl - Internal General Visual Inspection
05-24-00-211-812 EWIS Components in the Wing Stub Rear-Box - Internal
General Visual Inspection
05-24-00-211-813 EWIS Components in the Wing Rear Box
– Internal
General Visual Inspection
05-24-00-211-814 EWIS Components in the Wing Leading Edge - Internal
General Visual Inspection
05-24-00-212-801 Wing and Winglet Upper and Lower Surfaces - External
05-24-00-212-802 Main Landing Gear, Main Landing Gear Compartment And
Doors
– External General Visual Inspection
05-24-00-212-803 Wing Leading Edge, Wing Slats, Wing Root Landing Light
Fairing, Winglet Leading Edge and Wing Tip Fairing - External General Visual
Inspection
05-24-00-212-804 Flap, Aileron, Spoilers, Wing Trailing Edge, Flap Track
Fairings and Shrouds - External
05-24-00-213-809 Interface Connectors and Overbraids in the Wing -
Detailed Visual Inspection
05-24-00-212-805 EWIS Components in the Wing Trailing Edge - External
General Visual Inspection
05-25-00-211-801 Forward Passenger Door - Internal General Visual
Inspection
05-25-00-211-802 Aft Passenger Door - Internal General Visual Inspection
05-25-00-211-803 Forward Service Door - Internal General Visual Inspection
05-25-00-211-804 Aft Service Door - Internal General Visual Inspection
05-26-00-212-801 EWIS Components in the Main Landing Gear Bay -
External General Visual Inspection