emaux SPV150, User Manual

Page: 17 / 29

P a g e | 17
9.6 Schedule Policy
a) Programmed Schedule Priority Schedule 1 > Schedule 2
b) If more than 1 schedule is enables within the same time period, the controller will operate only with the
highest priority schedule and speed. The corresponding indication light will turn on.
c) If all schedules are completed according to their pre-set times, the controller will return to the condition
before setting the schedule.
d) When one of programmed schedules is running and before schedule end. Any operation such as Start / Stop,
speed adjust by
or
▼
, Speed 1-3 and any change by external RS485 MODUS. The schedule timer and speed
will be resumed when it is start over by pressing the Start / Stop to run again.
e) The scheduled settings and auto-recovery cannot contradict each other. When there is an error, the
variable speed driver will restore the settings to those before the error. (The priority setting is still
applicable).
10. PRIMING SETTING
10.1 PRIMING TIME
•
Press “
▼
” to access PRIME TIME setting. Default is 2 minutes
• Press “ ” or “
▼
” to adjust the value.
• Press “Mode” to save setting or press “Speed 3” to cancel.
10.2 PRIME SPEED
•
Press “ ” to access PRIME SPEED setting
•
Press “ ” or “
▼
”to adjust the value.
•
Press “Mode” to save setting or press “Speed 3” for cancel.
10.3 PRIMING ENABLE / DISABLE
• Press “ ” to access enable and disable setting. Default is ON.
•
Press “ ” “
▼
” to set ON or OFF.
• Press “Mode” to save setting or press “Speed 3” for cancel