2.0 Connecting and Charging the Player
2.1 Connecting and Disconnecting the Player from Your Computer
To
connect
your player to your computer:
1. Turn the player ON.
2. Insert the small end of the included USB cable into the player.
3. Insert the large end into the computer’s USB port.
The
first time
you connect the player to your computer; the computer will
automatically detect it and install any necessary drivers. When it has finished, the
player will appear in
My Computer
as
EMATIC MP3
To
safely
remove
the player from your computer:
1. Click the green arrow in the system tray (the area by the clock on your
task bar).
2. A list of attached USB devices will be displayed. Highlight the player in the
list.
3. If asked, click STOP. Windows will display a message when it is safe to
remove the player.
WARNING:
Any USB device that stores data (e.g. flash drives, cameras, and
media players) should always be disconnected from your computer using this
method to avoid corrupting the stored data.
2.2 Charging the Battery
The player has a built-in battery that must be charged before the player can be
used.
1. Turn on the player.
2. Connect the player to a computer using the USB cable (the computer
must be ON for the player to charge properly).
3. The player will display a screen that says ‘USB Connected.’
Wait 15 seconds, then press the MENU/EXIT button and the
screen will change to a large recharging battery icon
(indicating the player is properly recharging).
4. Let the player charge for
4 hours before initial use. You can charge
the player for 2 hours per recharge cycle thereafter
.
E4 Series User Manual Page 5 of 32
