tor channel to become blocked. Should this happen, it will be necessary to:
– stop forward movement immediately, disengage the blades and stop the engi-
ne;
– take off the grass-catcher or stone-guard;
– remove the accumulated cuttings, reaching them from the exit of the collector
channel.
This job must only be performed with the engine turned
off.
5.4.8 E
ND OF MOWING
When you have finished mowing, disengage the blades, lower the engine speed
and ride the machine with the cutting deck in the highest position.
5.4.9 E
ND OF WORK
Stop the machine, put the accelerator lever in the
«SLOW» position and turn off the engine by putting
the key into the «OFF» position.
When the engine is stopped, close the fuel stopcock
(1)
(
if fitted)
.
With 12 - 12,5 - 13,5 HP B&S, engines, to avoid backfire,
put the accelerator in the «SLOW» position for 20 seconds before stop-
ping the engine.
Always take out the ignition key if leaving the machine
unattended!
5.4.10 C
LEANING AND STORAGE
After each mowing, clean the outside of the machine, empty the grass-catcher
and shake it to remove residual grass and earth.
Always empty the grass-catcher and do not leave contai-
ners full of cut grass inside a room.
Clean the plastic parts of the body with a damp sponge using water and deter-
!
WARNING!
!
WARNING!
!
WARNING!
➤
!
WARNING!
EN 30
HOW TO USE THE MACHINE
1
