em-tec SonoTT, Operating Instructions Manual

Page: 22 / 52

EN
Problem Possible Cause Action
Measurement
appears to be false.
The plug is damaged
(e.g. broken pin).
1. Check if the sensor is connected properly to the
device and if the sensor is damaged.
2. Check if the plug is damaged and if there are any
broken PINs.
3. If the plug is damaged, return the device for servicing.
If the problem persists, return the sensor for servicing*.
For more troubleshooting, please refer to the operating instructions of the SonoTT
TM
Ultrasonic FlowComputer.
*For more information concerning the return and servicing of our products, please refer to chapter 5.9
"Maintenance and Service".
9 Environmental Protection and Disposal
Packaging
Packaging materials are made from environmentally friendly materials. The packaging materials will be
disposed of by em-tec GmbH upon request.
Disposal
The SonoTT
TM
Clamp-On Transducer and its accessories must be disposed of in accordance with the applicable
national provisions for electronic components. In accordance with the requirements of EU Directive
2012/65/EC
Waste Electrical and Electronic Equipment (WEEE), our customers in the EU are entitled to return all waste
deriving from the products to us – in clean and disinfected condition. The em-tec GmbH WEEE registration
number is:
DE 99135207
.
Upon receipt, we repair or dispose of these components properly. For our address please see the very beginning
of these operating instructions. For the best utilization of raw materials, the product and its components and
accessories should not be disposed of together with household waste. All parts must be collected separately
from household waste and disposed of in an environmentally responsible way in accordance to local regulations.
• Before disposal, decontaminate all parts according to the procedure applicable in the clinic.
• If you have questions about disposal, please contact em-tec GmbH’s service department.
• Waste may only be brought to the appropriate recycling facility if there is no risk of potential infection
from electrical and electronic waste.
SonoTT
TM
Clamp-On Transducer
Page 22 D162-700 SonoTT
TM
Clamp-On Transducer - Operating Instructions V3.0 Copyright em-tec GmbH