EN
No.
Description
4
Device Modbus-Port.
The Modbus-Port can be changed by adding the new port into this field and clicking the store*
button.
In order to avoid any unintentional changes of the Modbus port, the user has to enter a
password to proceed.
•
Clicking into the field containing the
address mask automatically opens a
pop-up window.
•
The default user name is "root".
•
The default password is "uknown".
Please note:
like "unknown" but
without the "n".
•
To proceed with changing the IP address, select "ok", to stop the action and leave the IP
address unchanged, select "Cancel".
Some web browsers automatically save the user name and password, even if
they do not explicitly let users know that they do. If this is the case, the pop-
up window asking for the user name and password only appears once—for
the first action where it is needed—but after that all actions can be carried
out without the user having to enter the user name or password.
5
Password to open the setup page.
The password can be changed by adding the new password into this field and clicking the
store* button.
•
If the field with the password stays unchanged,
the password will NOT be
changed.
•
Only if the field with the password changes can the new password be
changed to the device.
6
Serial number of the BioProTT
TM
FlowMCP (read-only field)
7
MAC address of the BioProTT
TM
FlowMCP (read-only field)
8
Possibility to keep sensor settings after a restart or reconnection of a sensor on a flow channel.
This field is selected as default. When selected, the zero information and the selected
calibration table of the sensor is stored for the respective flow channel so that after a power
cycle or reconnection of a sensor, these settings are used.
9
Possibility to clip the RSS value to 100 %.
This field is selected as default. When selected, the RSS value over Modbus TCP and in the web
interface is clipped to 100 %. When not selected, values up to 133 % are possible.
BioProTT™ FlowMCP
Page 36
Copyright em-tec GmbH
D214-703 BioProTT™FlowMCP – User Manual – V4.0
