89
Fig. 1
Fig. 2
Q8: DVR displays “please wait…”all the time.
a. HDD power cable and data cable may not be well connected. Please check the connections for HDD.
b. It is also possible that the DVR was forced to stop because HDD has a bad sector and it may have caused the system to halt.
Check with a good known HDD or try formatting the existing HDD.
Q9: How to input password and digital numbers?
Click the password or the input box to pop up a small keyboard. Please select characters to be input (the initial password is 123456), or you can use the
digital keys on the front panel, or the digital keys on the remote controller.
Q10: A hard disk is being identified as a new device however it was being used with another DVR of same model. Should it be formatted prior
use?
It is possible to migrate an HDD from one DVR to another provided that the DVRs are of the same model and that the HDD being migrated would be used
as the sole disk in the new DVR. However in cases where the new DVR already contains a HDD, the migrated disk being installed would have to be format
-
ted. In general migrating disks from one DVR to another is not recommended.
Q11: What is the minimum configuration required for remote monitoring?
PC Module
Parameters
CPU
Intel Celeron 2.4G
Motherboard
Intel 845
HDD
80G
RAM
512M
VGA
NVIDIA GeForce MX440/FX5200 ATIRADEON 7500/X300
OS
Windows 2000(SP4 above) /Windows XP(SP2 above) /VISTA
DirectX
9.0
Q12: How to handle the situation that the codec Control is blocked when downloading in the VISTA or Win7 system?
This problem can be fixed in two ways:
a.
Enter Control Panel
User Account and Family Safety
User Account Control (refer to the following figure) and click Turn User Account
on or off. Cancel Use User Account Control (UAC) to help protect your computer.
EN
Summary of Contents for 46540.F04
Page 95: ...93 ...