Elvox 46540.F04, Installation And Operation Manual, Page: 59 / 96

57 EN
Parameter Meaning
Record To enable/disable recording for the channel
Audio
To enable/disable audio recording for the channel
2. Checkmark record and audio.
3. Select All to set up the same settings for all channels.
Fig 4-10 Record Configuration-Enable
4.3.1 Enable
1. Go to Menu Setup Record Enable interface. Refer to Fig 4-10:
4.3.2 Record Bitrate
1. Go to Menu Setup Record Record Bitrate. Refer to Fig 4-11:
2. Set up rate, resolution, quality, encode and max bit stream.
3. Select “All” to set the same settings for all channels.
4. Click “Apply” button to save the setting.
Parameter Meaning
Rate 720P: 1-30 (NTSC) / 1-25 (PAL), 1080p 1-12 (PAL) 1-15 (NTSC)
Resolution This series supports 1080P.
Quality The higher the value is, the clearer the recorded image is. Six options:
lowest, lower, low, medium, higher and highest.
Encode VBR and CBR.
Max bit stream You shall adjust it subject to the actual network condition.
Fig 4-11 Record Configuration-Record Bitrate