80
10.2 IE Remote Surveillance via LAN & WAN
In order to view the DVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 4.6
Network Setup. This DVR supports IE browser, on Windows XP and Vista platform.
10.2.1 Via LAN
1. Go to the DVR‟s Main Menu
Setup
Network interface to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP in both the
DVR and the router.
2. Enter Record Setup to set network video parameters like resolution, frame rate etc.
3. Open IE on a computer on the same network. Input the IP address of the DVR in IE address bar and press enter.
4. IE will download ActiveX component automatically. Enter the username and password in the subsequent window
Notice:
If HTTP port is not 80, other number instead, need add the port number after IP address. For example, set HTTP port as 82, need input
IP address like 192.168.0.25:82.
User name and password here are the same with that used on the DVR. The default username and password is admin and 123456.
10.2.2 Via WAN
There are two ways for the DVR to connect to internet.
1. Connect the DVR to internet through router or virtual server
1. Go to the DVR‟s Main Menu
Setup
Network interface to input IP address, Subnet Mask, etc. If using DHCP, please enable DHCP in both the
DVR and router.
2. Forward IP address and port number in Virtual Server setup of the router or virtual server.
Configure the firewall to allow accessing the DVR. (If the user has enabled the UPnP function in both the DVR and router, he can skip this step.)
3. If users want to utilize dynamic domain name, please apply for a domain name in a DNS server supported by the DVR or router. Then add to the DVR or
router. This unit supports www.meibu.com, www.dyndns.com, www.no-ip.com and mintdns type.
4. Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port number after IP address or domain name.
5. IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to
view.
Note:
If you cannot download and install ActiveX, please refer to FAQ Q7.
2. Connect the DVR to internet directly
1. Go to the DVR‟s Main Menu (Setup) Network interface to enable PPPoE and then input user name and password received from your ISP. Next, click „Ap
-
ply‟. The DVR will connect to the server and would give a confirmation message.
2. When accessing the remote interface of DVR, user can input WAN IP to access directly
(user can go to Main menu
Information
Network interface to check IP address). The browser will download Active X control.
3. The following setting steps are as the same as Step 4 and Step 5 in Point 1.
10.3 Remote Surveillance through Apple PC
Note:
Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode.
If the browser is the earlier MACOS version, the default setting is 32-bit mode and the setting can be skipped.
The setting steps are as follows:
1. Right click safari icon and select “Show in Finder”.
2. Select Applications
Right click “Safari. App”
Select “Get Info”.
EN
Summary of Contents for 46540.F04
Page 95: ...93 ...