Elumen8 KUDOS CYCLONE, User Manual

Page: 8 / 37

7
DMX Address
To select DMX Address , press the ENTER button to show the DMX ADDRESS on the display. Use
the UP / DOWN button to adjust the address from 001 to 512 . Once the address has been selected,
press the ENTER button to setup, to go back to the functions without any change press the MENU
button again. Press and hold the MENU button for about one second or wait for one minute to
exit the menu mode.
Channel Mode
To select Channel Mode , press the ENTER button to show the CHANNEL MODE on the display.
Use the DOWN / UP button to select the 10Chan , 13Chan, 15Chan , 17Chan or 29Chan Mode. Once
the mode has been selected, press the ENTER button to setup, to go back to the functions without
any change press the MENU button again. Press and hold the MENU button for about one second
or wait for one minute to exit the menu mode.
Show Mode
To select Show Mode , press the ENTER button to show the SHOW MODE on the display. Use the
DOWN / UP button to select the Show 1 or Show 2 or Show 3 or Show 4 Mode. Once the mode
has been selected, press the ENTER button to setup, to go back to the functions without any
change press the MENU button again. Press and hold the MENU button for about one second or
wait for one minute to exit the menu mode.
Dimmer Curve
To select Dimmer Curve , press the ENTER button to show the DIMMER CURVE on the display. Use
the DOWN / UP button to select the Mode1 or Mode 2 or Mode 3 or Mode 4 . Once the mode has
been selected, press the ENTER button to setup, to go back to the functions without any change
press the MENU button again. Press and hold the MENU button for about one second or wait for
one minute to exit the menu mode.
Mode 1(Optically Linear): The increase in light intensity appears to be linear as DMX value is
increased.
Mode 2(Square Law): Light intensity is finer at low levels and coarser at high levels.
Mode 3(Inverse Square Law): Light intensity is coarser at low levels and finer at high levels.