Elumen8 KUDOS CYCLONE, User Manual

Page: 9 / 37

8
Mode 4(S-­‐cure): Light intensity is finer at low levels and high levels and coarser at medium levels.
Slave Mode
To select Slave Mode , press the ENTER button to show the SLAVE MODE on the display. Use the
DOWN / UP button to select the Slave 1 (normal) or Slave 2 (2 light show) mode. Once the mode
has been selected, press the ENTER button to setup, to go back to the functions without any
change press the MENU button again. Press and hold the MENU button for about one second or
wait for one minute to exit the menu mode.
Black Out
To select Black Out , press the ENTER button to show the BLACK OUT on the display. Use the
DOWN / UP button to select the Yes (blackout) or No (normal). Once selected, press the ENTER
button to setup, to go back to the functions without any change press the MENU button again.
Press and hold the MENU button for about one second or wait for one minute to exit the menu
mode.
NOTE: If the fixture is set in BLACKOUT mode it will no longer function in sound or master mode
and only respond to DMX control.
Sound State
To select Sound State , press the ENTER button to show the SOUND STATE on the display. Use the
DOWN / UP button to select the On (sound on) or Off (sound off) mode. Once the mode has been
selected, press the ENTER button to setup, to go back to the functions without any change press
the MENU button again. Press and hold the MENU button for about one second or wait for one
minute to exit the menu mode.
Sound Sense (Sensitivity)
To select Sound Sense , press the ENTER button to show the SOUND SENSE on the display. Use the
DOWN / UP button to adjust the value from 0 … 100 . Once the mode has been selected, press the
ENTER button to setup, to go back to the functions without any change press the MENU button
again. Press and hold the MENU button for about one second or wait for one minute to exit the
menu mode.