Elumen8 KUDOS CYCLONE, User Manual

Page: 11 / 37

10
the DOWN / UP button to select the Pan/ Tilt / Red1 / Green1 / Blue1/ White1/…Red4 / Green4 /
Blue4/ White4/ Dimmer or Strobe . Once the function or color has been selected, press the ENTER
button to setup, use the DOWN / UP button to change the value (0~255). Once the mode has been
selected, press the ENTER button to setup, go back to the functions without any change press the
MENU button again. Press and hold the MENU button for about one second or wait for one
minute to exit the menu mode.
Auto Test
To select Auto Test , press the ENTER button and the unit will run self-­‐test by built-­‐in program. To
go back to the functions press the MENU button again. Press and hold the MENU button for about
one second or wait for one minute to exit the menu mode.
Temperature.
To select Temp. , press the ENTER button and the display will show the current temperature of the
unit. When the temperature is under 55 degrees the fixture works normally: when it’s between
70-­‐75 degrees the fixture will reduce its power output and after 75 degrees the LED will switch off.
To go back to the functions press the MENU button again. Press and hold the MENU button for
about one second or wait for one minute to exit the menu mode.
Fan Mode
To select Fan Mode , press the ENTER button to show FAN MODE on the display. Use the
DOWN / UP button to select Auto (normal), Low (low speed) or High (high speed). Once selected,
press the ENTER button to setup, go back to the functions without any changes press the MENU
button again. Press and hold the MENU button for about one second or wait for one minute to
exit the menu mode.
Fixture Time
To select Fixture Time , press the ENTER button and the display will show the number of working
hours of the unit. To go back to the functions press the MENU button again. Press and hold the
MENU button for about one second or wait for one minute to exit the menu mode.
Firmware Version
To select Firmware Version , press the ENTER button and the display will show the version of