Elumen8 KUDOS CYCLONE, User Manual

Page: 14 / 37

13
Mode
Sound
(LED OFF)
Show
(LED ON)
LED fast blinking
4.3 DMX Controller
When using a universal DMX controller to control the units, you will need to set DMX address
from 1 to 512 so that the units can receive DMX signal.
Press the MENU button up to where DMX Address is showing on the display. Press the ENTER
button and the display will blink. Use the DOWN / UP button to change the DMX512 address. Once
the address has been selected, press the ENTER button to setup, to go back to the functions
without any change press the MENU button again. Press and hold the MENU button for about one
second or wait for one minute to exit the menu mode.
Please refer to the following diagram to address your DMX512 channel for the first 4 units
：
Channel mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
10 channels 1 11 21 31
13 channels 1 14 27 40
15 channels 1 16 31 46
17 channels 1 18 35 52
29 channels 1 30 59 88
4.4 DMX 512 Configuration
10 CH MODE (MODE 1):
CHANNEL VALUE FUNCTION
PAN
1
0 – 255 0° -­‐ 540°
TILT
2
0 – 255 0° -­‐ 270°